Connecting a Snap Sign to a Network Using a Smart Phone

• The purpose of this guide is to provide a walkthrough of the process of connecting a Snap Sign to a Network
• This guide is intended for the personnel responsible for maintaining the sign
• If you require any assistance past what this guide provides, please contact Versatile Credit Customer Support.
  • Email: support@versatilecredit.com
  • Phone: 866-803-3369

Step-by-Step Guide

1. Remove the PVC sleeve around the Snap Sign's screen
2. Press and hold the right-most button until the main configuration menu appears

3. Click on Network Configuration

   

4. Click on Configure from Phone

   

5. Click on Start to initiate the phone-based configuration process

   

6. Click Configure

   

7. On your phone, scan the first QR code to join the Snap Sign's temporary Wi-Fi Network

   1. If the phone doesn't automatically connect after scanning, you can connect to it manually from your phone's network menu

      

8. Click on Next and scan the second QR code to reach the Snap Sign's administrative site

   

9. Sign in to the System Login using the Snap Sign's password

   1. The default password is located in a tag on the back of the sign (VSS-###-###)

      

10. Select your network from the dropdown box

    1. Use the refresh button should no networks populate in the dropdown

       

11. Enter the password for the selected network
12. Click on Save

13. On the Snap Sign, click on Configure to complete the process

    

14. Once the network is configured, click on Done and exit out of the Snap Sign configuration menu. The Snap Sign should now start displaying QR Codes