Connecting a Legacy Kiosk to a Network

  • The purpose of this guide is to provide a walkthrough of the process of connecting a Legacy kiosk to a Network
  • This guide is intended for the personnel responsible for maintaining the kiosk
  • If you require any assistance past what this guide provides, please contact Versatile Credit Customer Support

Before You Begin

Before attempting to connect a kiosk to a network, be sure that you have the following:

  1. The network name and password (if using Wi-Fi)
  2. The kiosk's administrative password (*)

(*) - A kiosk's administrative password is chosen during the kiosk's initial setup process. Please call Versatile Credit Customer Support if you need the password.


Step-by-Step Guide

  1. Reboot the kiosk by unplugging it and plugging it back in

  2. Click on Configure once the option becomes available

  3. Enter the kiosk's administrative password

  4. In the Configuration Main Menu, click on Networking

  5. In the Network Menu, click on Connect


  6. Select the network type

  7. If you selected Wireless, choose your desired network from the list. See Step 9 if you selected Wired

  8. Enter the Wi-Fi password for your wireless network

  9. Enter any necessary Network Configurations. By default, "Use DHCP" is set to Yes, and "Use Proxy Server" is set to No

  10. The kiosk will now test the network connectivity (**)

  11. If the system completes the network test successfully, the kiosk will begin its system maintenance. Afterward, the kiosk will be ready for use


(**) - Please contact your network administrator if you receive an error contacting the Versatile Administrative Server during this step

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.